How to Detect Drug Abusing Teenagers

The effects of substance abuse in teens are not only individual; they can also be seen on the society. They may face problems at school or college and may involve in criminal activities. It is therefore very important to detect drug abusing teenagers. Drug testing should be conducted on a regular basis at schools and homes to identify and save them from harmful drugs of abuse.

Signs of drug abuse
Identifying certain signs helps you to detect if the kid is addicted to the drugs. Some of the common physical and emotional signs are:

• Change in sleep patterns
• Poor motor coordination
• Poor hygiene and illness including nausea and excessive sweating
• Irregular heartbeat
• Impaired thinking
• Mood swings
• Hyperactivity or overtired
• Depression

Drug abusing teens lose their interest in family activities, often abuse verbally and physically at home or school, and disrespect the family or school. In addition, abrupt decrease in grades, memory and attention loss, and lack of interest and concentration on studies are some of the signs at school. The moment you observe any of the above mentioned signs, you need to immediately check if the kid is abusing drugs. Drug testing is one of the safest and easiest ways to detect the drug abuse among teens.

Types of drug tests
There are different types of methods to detect the teens who are using drugs. Some of the common ones are urine, saliva, hair, and blood tests.

Urine drug test
Of all the types, urine testing is used most commonly as it is inexpensive method used to detect a drug user. You can use urine test kits at home or school to check if the child is addicted to illegal drugs. Quick and accurate results are obtained by these test kits.

Saliva drug test
It is more advantageous as it is relatively non-intrusive. Saliva from the mouth is taken through a swab and is checked for the presence of drugs. Most recent drug abuse can be detected by saliva tests. Conducting saliva test is very easy and also provides accurate and immediate results.

Hair drug test
This method is also non-intrusive. A hair sample of 1.5 inches in length is enough for conducting the test. Drug or its metabolites deposited at the hair shaft are detected by hair tests. You can get very reliable and accurate results by this method.

Blood drug test
You can also use a blood sample of the teen to detect illegal drug usage. It is however expensive and you need to approach laboratory as you cannot conduct it at your home.

Detection periods
The detection period depends on the method of test conducted. These detection periods vary from the type, dosage, and frequency of drug used.

Urine drug test can detect drug or its metabolites for 30 days in frequent users and for 2-3 days in occasional users. The test detects Cocaine for 4-5 days, Heroin for 2-4 days, Methamphetamine for 3-5 days, PCP for 3-7 days, and Codeine for 2-4 days.

A saliva test is mostly used to detect recent drug usage. However, it can also detect drugs consumed 3 days back. Of all the methods, hair drug test has a longer detection period. It detects illegal drug consumption for about 90 days.

What if results are positive?
Once the kid is tested positive by drug test kit, talk to him/her about the result. You can get a confirmatory result through laboratory tests. Communicate with him regularly regarding the effects of drug abuse. Ask him to leave companions or friends who are habituated to drugs. If necessary, send him/her to substance abuse treatment program.

Importance of intervention
Detection and intervention of drug abuse at primitive stages can prevent further damage. Drug intervention is an attempt made by family members or school authorities to help the teen get out of drug abuse or addiction. The main objective of intervention is to make the teen understand the physical and mental destruction caused by drug abuse. If you are not able to speak to the kid on this, you can take help of your friends or relatives. You can also consult specialists who counsel drug abusers and help them get back to their normal life.

Parents and school authorities should always keep an eye on the behavior and activities of the teens. Necessary measures have to be taken in order to prevent them from taking drugs.

Both Practicality and Fashion Style Can Be Obtained by Carrying Tote Bags

More and more women love to use tote bags, because of their practicality and fashionable style. Usually, tote bags are designed to be in large size, which can enable people to carry more things that you may happen to buy at the supermarkets apart from basic personal necessities. For daily use, totes are top choices for women to create trendy and fashionable styles.

Generally speaking, leather is the most preferable material used to make totes. With the material of leather, the quality of the bags can be firmly ensured. Since totes are supposed to carry many things from personal stuff to unexpected items bought anywhere, the quality and durability should be seriously reliable. On the other hand, when you are buying a tote, you need to check the straps to see whether they are made of real leather and whether they can bear the weight of heavy things. If the straps fail to meet the needs, the quality of the bag should be questioned. Sometimes, you can also find tote handbags are made from cotton or canvas.

The design of totes can vary a lot. Still, regarding the practical purpose, many totes are designed with several pockets inside and outside, some with zips on them. Some totes have adjustable straps, which provide great convenience to busy women. The straps of bags in different styles are attached to the bags in different ways, some with the use of clasps and some with buckles.

Without doubt, designer totes always turn out to be top choices for women. You will have no worries about both the style and quality. However, even though the bag is flawless in design and style, you should be careful with the pairing. Only when you pair the bag with the outfit in proper way will the whole style become eye-popping.

Auto Transport and Its Process

Auto transport is such a way of getting your car being moved from one place to another with the help of auto carriers. Instead of having ourselves do the job, transport companies could actually get the job done for us. It is otherwise known as car shipping, auto shipping or vehicle shipping. Getting your car transported across countries is quite a compelling and a hard task to do, therefore a special truck is required for it.

The process of auto transport is not that easy as it seems. The time it takes for it to be completed and the total cost to be covered on the process depends about on how well you do your research and evaluation of the various transport companies. The internet has made it a lot easier for anyone to look for companies rendering these services and for making some comparisons about it. But with a lot of them present on the web, it is still quite a bit harder to choose for the best one among them.
< There are various types of auto transport which is being made possible and available for everyone, and here are some details regarding this matter: Open-type Auto Transport

Open-type process is a type of transporting which definitely means open to the elements. Moreover, open-type car transport is the typical type and a majority of transport companies use this one and besides, it is much easier to find. This can carry up to 10 cars at a time and it also has a lot of car haulers as well. But there are some times wherein it’s unsafe due to some weather disturbances but oftentimes, it doesn’t happen that much and a majority of the vehicles being transported to their desired location arrived without even a single scratch on them.

Close-type Auto Transport

From the name itself, it simply means it is close from all elements. Close carriers are much safer and it ensures your car to be safe from unexpected weather disturbances. This is one of the reasons why close-type transport costs a lot more when being compared to an open-type transporting. It could only carry from 2-3 cars at a time making each car completely protected from any elements hereunto. If you have a luxury car and want to have it transported, then close-type transport would be best for you.

Door to Door Auto Transport

This type of auto transporting provides that the mover will deliver the car right into the house of their customer, thus saving time and energy of the customers as well. It is a lot more advantageous compared to other types since it is not only easy but economical as well. During this time, mostly all transport companies avails door to door delivery since it is of great demand both in the national and international industry.

Terminal to Terminal Auto Transport

This type of transporting simply means transporting the car on a particular time and day. Terminals are of great advantage especially to those who wants to accumulate their cars on an exact date and time.

These are the ways of getting your cars transported to your desired destination. So if you would like to get the job done as soon as you wanted, then it would be best to look out for the best auto transport company for you.

Whenever the need for auto transport is on your plan, don’t forget to always check out for the best transport companies on the web. These types of transporting processes could help you to start with.

Different Types of Wooden Home Furniture

A home is incomplete without an elegant set of furniture. Furniture is often the reflection of our personal style, budget, trend, space and many other factors. Even though furniture is available in different materials such metallic furniture, plastic and glass furniture, most of the people still prefer to buy furniture made of wood. The elegance and opulence exuded by wood furniture is quite commendable. Different types of wood are used to manufacture all kinds of furniture required for homes and offices.

Various Types of Home Furniture

Wood is still used to manufacture furniture as it is comparatively cheaper than the metal furniture. It is also tensile and lasts for years together.

Bedroom furniture: As most of the people prefer to use furniture made of hard wood and soft wood in their homes, a large variety of bedroom furniture is available quite easily today. Some of the most common types of furniture used in bedrooms include the wooden beds, nightstands, dresses, jewelry boxes, trunks, chests, bed frames, dressers and wardrobes.

Different types of wooden beds are manufactured to meet the requisites of various individuals. King size, queen size, double beds, single beds, canopy beds, standard twin beds, sofa-like day beds and sleigh beds. The canopy wooden beds are quite popular for its elegant appearance with framed posts and crossbeams with beautiful flowing curtains. Most of the modern homes include plush chairs, vanity tables and full length mirrors that create a beautiful and posh ambience in the bedrooms.

Living room furniture: A sofa set is the focal point of a living room. Wooden sofa set enhances the decor of your home with its extravagant designs and styles. Different types of sofa sets are available today at attractive price rates. There are single seat sofas, double seat, three seat and four seat sofa sets made of different types of wood. Wooden sofa sets are usually upholstered with leather or soft fabrics for extra comfort and elegance. Modern furniture includes sofa sets made of leather as it is both chic and elegant.

Other Types of Home Furniture

Coffee tables, side tables, ottomans, chest of drawers, wooden almirah are some of the other most widely used furniture in a home. Dining tables are also considered to be essential pieces of furniture in a home. Dining tables are available in different sizes and shapes. Oval dining tables are quite elegant. Round and rectangular dining tables are also available at attractive price rates today. Most of these tables are made from expensive wood such as mahogany and teak. It is easy to obtain matching dining chairs to enhance the beauty of your dining room.

Large armories made of different types of wood are also available easily today. Wooden armories in living rooms are mainly used to store electronic products such as televisions, DVD players, home theaters, music players, computers and so forth.

The beauty and the elegance of wood furniture can be emphasized with durable finishes. Furniture made of any type of wood is known to add matchless beauty to any room it occupies.

How To Treat Hemorrhoids In Children – Care and Safety for Kids

Hemorrhoids concern is hard enough to deal with for adults, what more if this condition begin to affect and intrude in the daily routine of children? Now that is a kind of problem that no parent would like their children to have, however sometimes no matter how hard we try to keep our kids at top condition, problems like hemorrhoids cannot just be avoided. In this case, learning how to treat hemorrhoids in children is the next best move any parent can have, the delicacy of the young’s position in treating the situation of swollen rectal blood vessels.

How to treat hemorrhoids in children? This is a question that all mothers and even fathers would definitely want an answer to. But before we get into that, it would perhaps be good to explain first what causes hemorrhoids, so that we can easily address their solution. Well, hemorrhoids are somewhat similar to varicose only that this condition of swollen blood vessel occurs in the general area of the anus around the rectal canal to be more precise.

This sickness is the common result of the pressure on the veins of the anus during defecation. It is not clearly defined by any medical practitioner, what really causes these swellings to occur only that there are factors that usually the reason for their appearance. The factors that lead to hemorrhoids may vary from constipation, diarrhea, smoking, frequent drunkenness, pregnancy and giving birth among others. In the case of children it is obvious that the last four reasons enumerated earlier on could not be applied in the case of children.

In the case of kids it is usually a matter of the first two reasoning happening often due also to the food intake and kind of diet children have. We all know that very young children often have very poor diet, and as such may contribute to the development of hemorrhoids or piles.

Now to the go to the issue on how to treat hemorrhoids in children, here are a few tips to take note of:

a) Allow children to drink at least eight to ten glasses of water every day. In the case of children given their active days it is advisable that they increase their intake of water for better body process and easier time taking a poop.

b) Add fiber rick food in their diet. Children often eat more of meat products as they do vegetables and fruits. Unfortunately bought fruits and vegetables are rich in not only vitamins, but also fiber which is important to make defecating easy for them.

Home Improvement Tips – Ideas for Changing the Flooring

So you’re thinking about changing that ugly old carpet or vinyl floor with something fresh and beautiful and you want to use tile instead. You have looked at a lot of pictures in home design magazines; you have an idea of the cost, and the retailer with the best selection but know where to start.

Well it sound like you already have a great start, you found some design ideas from magazines, you know where to purchase the materials, and you have a rough idea of the cost, and you have decided to do this yourself, outstanding! The tips I’m about to give you come from my experience as a professional tile setter in Phoenix Arizona.

The first thing you want to think about is what kind of surface are you going to lay that beautiful tile on, wood or concrete. I have found that the preparation of the surface will determine how your tile will look after it’s installed and how long it will last in the home, and let’s face it you don’t want to redo this next year. Follow these basic steps first before you lay your first tile

Is the surface level

Look for flaws like dips and bumps make sure the surface is smooth

If working with a wood surface make sure it’s secure no nails sticking up and it’s tight to the substructure

When working with concrete look for cracks, you don’t want the surface to crack more after you install the tile

Make sure the surface is clean before installation

These starter tips will save you time and frustration and make the experience more enjoyable for you. Next you want to make sure you measure the area you’re going to lay. You don’t want a 6″ cut on one wall and a 3″ cut on the other that would look really bad especially in a entry way. The first thing you need to make sure of is the room you are working with square? Trust me when I say this you don’t know how many times I went into a new home and found that one end of the room measured 12′ and the other end was 12′ 2″ Because of poor framing. This is ok if you’re working with larger tile but can be a real problem if it’s smaller tile like in a bathroom. Here are some tips on laying your floor out before starting the installation.

Buy some tile spacers. They look like small rubber crosses, they will determine your grout line width and give you an idea of your wall cuts, and in most cases will measure ¼ in, between tiles.

Don’t be afraid to lay the tile out in both directions using the tile spacers to get an idea what it’s going to look like.

After determining if your room is square set an installation chalk line in both directions, this will help keep the installation straight.

There are different types of adhesives for laying your tile I use thin set mortar for concrete, and you can use what is called cement board, this can be laid over any wood surface and will eliminate the use of the mastic clue. The reason for this is when wood is affected by temperature it will expand and contract, and the mastic clue will allow it to change with this effect, this is not a concern with cement board, Mastic is pre mixed, and thin set mortar will need to be mixed before you can use it. When mixing your thin set mortar it’s like mixing concrete it comes in a bag and you need to add water, be careful not to get it to thin, it needs to be thick enough to use with a trowel. I used a wheel barrel to mix it in and then transferred it to a 5 gal bucket, this made it easier to handle. Also remember that when installing the tile to make sure not to leave any air bubbles trapped under the tile. This will cause the tile to brake. The method I use is to set the tile by pushing down evenly on the tile until I see the adhesive start to come out from the edges and then I lightly tap on the top of the tile a listen for any hollow sound, this will tell you if there is a pocket of air trapped and if you need to push a little more.

Gold Rings for Men – A Popular Accessory

We usually don’t associate any kind of jewelry with men. When we think about jewelry we always think about the female gender and how they love to adorn themselves with ornaments. However, we have seen that as of lately men have started showing an interest in rings, especially in gold rings. Previously, they used to wear only gold rings on their engagements or on their weddings. But now, gold rings are worn to many formal and informal occasions and it has become more of a fashion statement, not merely an obligation or sign of marriage. Gold rings, due to the rising gold prices worldwide, are usually worn by the upper class, rich people in society. These people can afford to wear gold rings for almost every occasion. But if we look at the average man, a man owns at least one ring for himself.

Even though gold is such an expensive metal, it truly hasn’t been replaced by any other metal. There are a lot of reasons behind this, cultural being the main one. In this article we will be taking a look at the different kinds of gold rings for men in terms of design and we will also be emphasizing on how the variety of rings for men keeps increasing every day. Gold is a very popular choice for men’s rings. However, there is not just one kind of gold that is used in making rings for men. Although yellow gold seems to be used more often, there is white gold and rose gold, which is sometimes used in making rings for men. White gold is more commonly known as platinum and it is much more expensive in terms of price. It gives off a very white look, something that is similar to the shine of extremely well polished silver. Rose gold, on the other hand, has a slightly pinkish color to it (not too much) we don’t see many rings made out of rose gold, but it is used in several rings.

Gold rings, or perhaps any kind of gold jewelry, are not made out of 100% gold. It is almost always mixed with another metal, to make it stronger. We often hear the term carats when we’re shopping for gold jewelry and these carats tell us about how pure the ring is i.e. how pure it is. Usually, the higher the carats, the more gold the ring contains. For everyday use and to keep the affordability factor in mind, 10 to 14 carat rings are suitable for men. There are some rings which are gold-plated but we don’t recommend you to buy those, even if they are cheaper, because once the plating comes off, the metal is not as glossy as it was before.

There are many designs available in the gold rings. There are plain designs like the simple band and there are more complicated designs available in stores. Popularly, gold rings men have plain deigns like the simple wedding band, but now some gold rings have carvings and other designs engraved in them too. The use of stones in the rings is also popular, with different kinds of stones; precious and semi- precious, are used on the rings. There are some rings that have a ribbed design on them. You can either buy ready-made gold rings from stores or over the internet, but if you’re looking for something unique, you can have rings specifically made for yourself in your size and chosen design as well.

Is the New Fashion Trend Right for Your Business?

Is your style the right one for you or are you trying to copy the magazine or a celebrity? A lot of women today have this dilemma because we live in a world where fashion style dictates who you are in the society. The world is changing so fast and the fashion trends are also adjusting every now and then. With a variety of fashionable items to choose from, creating your own personal style is not an easy task to do. You also need to take into consideration the kind of personality you want your viewers to convey about your fashion statement. Dressing your own style of fashion is not only to blend in the crowd but also to express more of yourself and be confident of your personality. Your own personal fashion style is your own personal brand of your own interests, aspirations, desires and lifestyle.

The following are some tips to consider when creating your own fashion statement:

  • Before trying something, try to scrutinize various fashion trends from different sources like magazines, television, advertising materials and the internet. You must know how to gather data to be able to investigate what you really want in your fashion style. You need to know how these trends are being collected so that you will have a better idea about the basics of fashion. From these concepts, you can mix and match and can create a clearer picture of your personal style.
  • Do not try to copy fashion statements of celebrities or friends because their own trend may not be the perfect style for you. Only buy items that best represent you as a person. Focus more on the clothing you wear and feel good about being yourself.
  • Venture on different styles. You can try different dresses and experiment on your own closet. Walking in front of a mirror or taking a picture of yourself can help you. By doing this, you will know what are the styles you want to keep or change. You need to remember that loving the items you wear boosts your self esteem.
  • There are several accessories you need to consider. Try to find the perfect accessory that will complement your outfit. Don’t go for accessory items just because they are a popular trend in your society. You need to realize that accessories are also important in creating your own personal brand.
  • The right hairstyle and make up is also a must in making your own style. Try to consider the shape of your face in selecting the perfect hairstyle. Be conscious about the right blend of make up for the right occasion.

Organizing your fashion statement involves risk. Don’t be afraid to take that risk. Inspire yourself with personalities you admire in the fashion world. Through this, you will be able to discover the true and unique person that’s within you.

The Future Is Now – Green Construction

Energy costs are skyrocketing and climate change is a legitimate threat. With traditional energy resources depleting at an alarming rate, it is imperative that we begin utilizing green concepts into our construction technology and building maintenance. It should be our goal as a responsible society to become energy independent and self-sufficient as soon as possible.

Taking measures to increase energy efficiency should not be thought of as a future endeavor. The time to begin modernizing our office buildings and commercial facilities is now. Building designers and architects have come up with amazing ways to support green development and healthy lifestyles from within small towns to expansive cities. Builders and planners are now on board with constructing facilities that meet or exceed LEED (Leadership in Energy and Environmental Design) certification. With new green technology being developed every day, new energy efficient and LEED certified buildings are going up at a monumental rate.

Wind and solar power are just two ways that a new green building can be energy independent. Clean solar or wind energy can power entire city blocks, not just the building where the instruments are installed. It is easy to see how a large commercial building has an impact on the surrounding community. By installing solar panels or wind turbines, a modern skyscraper can be a positive force for change to the entire city. When one giant leads by example and demonstrates how beneficial – economically and environmentally – operating a green facility is, it won’t be long before the entire city follows suit.

Obviously, not all buildings are new construction, and no one will tear down a perfectly good building in order to build a more efficient one with new green technology. But there are some steps that can be taken that will make even the oldest commercial building operate more energy efficiently.

Taking measures to decrease water waste is just one way a building can save money and have a positive impact on the environment. Installing tank-less hot water heaters and water-regulating faucets and toilets will have a significant impact on the overall amount of money saved in utility bills. Other steps a building maintenance department can take are making sure the HVAC system is operating correctly and replacing all incandescent light bulbs with energy efficient fluorescent ones. Cleaning and maintaining a building’s HVAC system will keep it operating at optimum efficiency, ensuring clean airflow and ventilation, while swapping out traditional light bulbs for fluorescent ones will drastically reduce electric bills and electricity consumption.

By incorporating green standards and green construction techniques into our commercial buildings, we will all enjoy the benefits of lower utility bills and clean, renewable energy. By reducing carbon emissions and water waste, we are creating an environment that the entire global community can enjoy for many years to come.

Industrial Vs Non Industrial Plasma Cutting Machines

Industrial vs Non-industrial Plasma machines

Plasma cutting technology is a widely used process that has gained widespread popularity for its ability to cut most forms of metal and is quite favored for its simplicity in use. It’s versatility with its range of capabilities and applications have made it a universally accepted metal cutting process.

Non-industrial Plasma

Non industrial plasmas are best suited for garage users of steel fabrication who require plasma cutting perhaps 2-3 hours per day 3-4 days per week. A plasma in this class is best suited to small operations that work on mostly customised jobs. Non industrial plasma units are much cheaper to purchase than industrial plasmas but cannot tolerate the ongoing high volume that an industrial Plasma is designed for. Air plasmas and lower end conventional mechanised plasmas generally fall into the category of non-industrial plasmas.

Industrial Plasma

Industrial plasmas refer to plasma units geared towards high volume large production facilities that have enough work to elicit a machine to operate a full eight hour shift five days per week. Plasmas in this class usually can operate up to three eight hour shifts per day, seven days per week if necessary. If your operation fits into this category then an industrial plasma is not only preferable, but an absolute necessity.

Higher end Conventional plasma and High Definition Plasmas fall into the category of industrial plasmas. With modern day advances however High definition is generally the plasma of choice due to the higher levels of automation they provide as well as the higher level of cutting proficiency they are capable of achieving.

Advantages of Industrial Plasma (high definition plasma)

• Lower operating Costs

• Oxygen and multi-gas capability for improved

• Faster Cut speeds

• Improved weldability

• Significantly longer consumable life

• Thicker cutting capability

• Quick disconnect torch

• 100% duty cycle

• Hi-Definition technology

• Best cut quality including squarer edges and rounder holes

• Mark, cut and bevel with the same consumables

• More process options for optimizing cut quality

• Remote (CNC) gas switching capability

• Patent TruHole technology for best plasma cut holes – unique to Hypertherm high definition plasmas

• Hdi thin stainless technology

• Optimal gas mixing for mid-range stainless steel

• Higher pierce capability

• Much higher automation

• Higher resale value

• Much longer life on machine

• Significantly higher production capability

• Significantly higher computer aided design capability

Essential components of an Industrial plasma cutting machine

What is most essential to a plasma machines ability to provide continuous quality cutting are the ‘Controllers’ of a plasma unit. A well-engineered, well-constructed control unit is essential to providing consistent high level cutting precision and quality, carried out at high speeds over long hours. A poor to average control unit is incapable of achieving consistent precision especially over long production intervals where it is likely to overheat or break down.

Controllers consist of five main components: Power source, controller, a lifter, drives and servo motors.

Power Source

It is very important to get a renown plasma source for your machine to achieve a high performance and reliability to deliver consistent cut quality, high productivity, lowest operating costs whilst lasting you a long time for your business.

Lifter

The lifter is an essential component providing precise height control of the plasma torch. Utilizing a quality THC height sensor will reduce the cut to cut cycle time (up to 60%), provides better cut quality due to proper assembly of torch height, savings on power and longer consumable life.

In addition the quality torch height controllers automatically adjusts voltage for proper torch height to optimize cut quality and consumable life. Traditional torch height controls require an operator to periodically adjust arc voltage to ensure proper cut height.

Control

The controller needs to have all the process expertise built in resulting in flexibility and ease of use for the end user. A quality controller has a digital I/O sercos system that will deliver reliable motion system quality and will improve the cut quality and productivity.

The software should allow flexibility and ease of use for the end user, so a person with little or no experience on the controller can cut like a seasoned professional in as little as a day.

High End Servo Drives and motors

High end drives like Bosch help ensure high stiffness essential for accuracy, minimal backlash and easy adjustment. The servo drives receive command signals that amplify and transmit electric current to the servo motor in order to produce motion proportional to command signals.

Their main advantage over DC and AC motors used in non-industrial plasmas is the addition of motor feedback which can be used to detect unwanted motion or to ensure the accuracy of a command motion. Servos in constant speed changing use typically have a better lifecycle than DC/AC motors and can also act as a brake by shutting off generated electricity from the motor itself.

Bosch Servo motors

Bosch servo motors allow for precise control of angular position, velocity and acceleration. It consists of a sophisticated motor coupled to a sensor for position feedback.

Stepper motors typically used in low end CNC machines provide no feedback encoder as drive signal specifies the number of steps of movement to rotate. This lack of feedback limits performance as the stepper motor can only drive a load that is well within its capacity otherwise missed steps under load may lead to positioning errors.

Low rails

Industrial plasma’s usually feature low rails secured to the ground to ensure the highest level of stability driven by helical drives to provide optimal accuracy during the rapid fast moving of the plasma beam during long production intervals.

Table design rails usually seen on non-industrial plasmas won’t have the same level of rigidity and are thus less suited to high volume rapid pace production. In addition with rails built onto the cutting table and so close to the plasma, with constant long duration cutting the rails are at risk of distorting in shape (over time) due to the constant exposure to heat.

CAD / CAM software

To greatly improve the efficiency of production in a high volume settings you require a more advanced software to provide a much wider range of functions which greatly enhance the productivity of that operation. Using a more advanced software unit can provide some of the following advantages just a to name a few:

• Import CAD and CNC files

• Separate multiple parts from a single CNC file

• Group Parts into clusters for nesting

• Automatic and manual nest sequencing

• Control cut directions and cut sequencing on part by part basis

The addition of a quality software allows a much higher level of automation, significantly reducing key punching and is user friendly enough to allow even the most novice operator to cut parts like a seasoned professional.

Cutting table

For the purposes of industrial fabrication it is essential that a cutting table is well constructed, heavy and durable to meet the demands of an industrial operation. In most non-industrial plasma units, cutting tables are constructed from thin sheet metal and alluminium castings to reduce the cost of the overall unit. The problem with this is that due to the thin, light construction, the table can shake or wobble, adversely affecting the accuracy of a cut part. Furthermore over long production periods, due to the ongoing exposure of heat generated from the plasma these tables are likely to distort over time.

The durable robust construction of an industrial plasma table is essential to give the table stability for the highest level of accuracy and to prevent heat distortion.

Industrial plasma units usually offer the choice of a water or dry table with a dust collection unit. Water tables are cheaper to purchase but require much more ongoing maintenance and cleaning which over time becomes more expensive than using a dry table with a fume extraction unit. In an industrial environment both are acceptable.

Non-industrial plasmas usually come with water tables once again to reduce overall the cost of the unit though some are offered with a dry table and fan which is only sufficient in removal of dust and fumes in a light fabrication setting.

Having a Support team

The purchase of a Plasma machine whilst being an expensive investment can provide enormous returns to any business where there is a demand for work, the correct facilities are utilized and they are maintained with the right level of care.

It is essential therefore that a full support team is available to service your machine for ongoing maintenance, in the incident of a breakdown or where any other form of technical support is required.

In any high volume industrial environment any down time can translate into large losses in profit so it is important to have a local service team, but more to the point a team who knows the full operation of the machine from bolt to bolt, to shorten the time required to fix the machine, though also to provide phone support for quick fixes that do not cost any call out fees.

Why Non-Industrial Plasmas are so much cheaper to purchase than Industrial Plasmas

Many first time buyers of Plasma machines may look into purchasing a non-industrial plasma as a form of entry level use not fully understanding the full capabilities or limitations they have especially when compared to industrial level plasmas.

A cheaper price tag is often the motivator to go with a non-industrial plasma but in the long run once users have been able to thoroughly compare the two in performance, reliability and productivity it becomes very clear why non-industrial plasmas are so much cheaper.

In most situations fabricators who start out using non-industrial plasmas find with ongoing use that their functional capacity is very limited and with further research and exposure to industrial plasmas that they eventually upgrade to one as they provide much greater productivity, more flexibility in use and better quality cut parts with consistent precision. In addition industrial plasmas have a much greater lifespan, are a lot more durable and are built to handle a much higher degree of volume equating to far better value.

Many manufacturers of non-industrial plasma machines try to capitalize on the lower end cheap market by providing only the bare essentials of plasma cutting. Many of the reasons they can offer a plasma machine at a cheaper price is due to reasons including:

– Often software is not included in the package and in many cases users need to integrate a separate laptop/PC to operate the CNC cutting function. Even when software is provided usually they only provide very basic functions.

-Table and beam are constructed of thin light constructed sheet metal, not suited to heavy duty fabrication and are highly likely to distort in shape over time, due to ongoing heat exposure generated from the plasma. Rails are also built onto the table rather than being bolted into the ground.

This type of design does not provide the stability required to support quality precision during fast rapid movement due to the lack of rigidity and lightness of the table construction.

-Use of DC/AC motors and stepper motors as alternatives to drives and servo motors translate to limited performance, slower cutting, inconsistent poorer precision and positioning, slower acceleration and velocity.

-Fume extraction units are not included and another way to reduce the price on non-industrial units. A water table or dry table with fan are usually what are provided, though with light fabrication this is usually sufficient.

-Cheaper components are normally incorporated that don’t have any real brand reputation for performance or reliability.

-Aside from the above non-industrial plasmas can generally operate perhaps 2-3 hours per day 4-5 days per week and have an average lifespan of about 3-5 years.

Conclusion

For those considering the purchase of a plasma unit it is very important to be clear on the capability of the unit and whether or not that unit can meet all their requirements not just that of a single part.

Plasma machines have been designed to provide varying levels of functionality with a price range to match. Industrial plasma machines are logically more expensive but when the components are thoroughly broken down, one can clearly see that the cost is commensurate with the performance and capability, and in retrospect this is also true of non-industrial plasma machines. When matched in the suitable environment, business owners often see a return on investment within 2-3 years and as smaller businesses grow, industrial plasmas become a very natural progression.